Also watch a video on how to install an SSD in 2010 right here (http://eshop.macsales.com/installvideos/mac_mini2010_hd/).
it's advertising. they use what looks best. one tv advert [where i am] showed someone doing their banking via the internet on an imac. the bank concerned doesn't support macs. a large pc seller has a an advert about leasing instead of buying, the computer used in the advert is a pismo, the apple logo is PSed out
Easily 125+ people here. 16GB 3G both carrier are already "gone" according to apple people.
I have been using a that crucial stick in my 15" pb and my wife in her 12" ibook. both have been running great. Just my opinion, but I would recomend getting mac certified.
I might head over. Let me know how the line is later in the day. I wonder when Walmart are going to sell theirs.
http://www.macrumors.com/images/macrumorsthreadlogo.gif (http://www.macrumors.com/iphone/2009/11/16/apple-releases-two-new-iphone-ads-song-gift/)
I just wondered by clicking on the link "The Snow Report"...What you mean a gift in that link?
It just showed the downloading URL to iTunes!!!!:confused:
I just wondered by clicking on the link "The Snow Report"...What you mean a gift in that link?
It just showed the downloading URL to iTunes!!!!:confused:
Hi,
I'm trying to install 10.3 on an old Tangerine G3 333 iMac. I've upgraded the RAM and the OS9 that was already instlalled was running fine. I then swapped out the HD booted off of the 10.3 install CD, erased HD and partitioned it to 7GB/33GB.
So far so good. I start the install and everything seems to be going just fine, but it never ask for the 2nd install CD. It goes through disk optimization and everything while still on the 1st CD. Then it reboots itself, but fails to find the OS on the HD and ends up wanting to install again.
I've done this 4 or 5 times now and can't figure out what is happening. Anyone have any ideas?
Thanks.Hmm... After it's done with the first CD, and it's rebooting, the CD is still in there, right? I believe that the mac continues to boot off the first CD until the second is needed. The HD isn't booted from until the installation has finished. Once it's done with the first CD, and restarts, try holding down the "C" key to ensure it doesn't try and boot from the HD.
I'm trying to install 10.3 on an old Tangerine G3 333 iMac. I've upgraded the RAM and the OS9 that was already instlalled was running fine. I then swapped out the HD booted off of the 10.3 install CD, erased HD and partitioned it to 7GB/33GB.
So far so good. I start the install and everything seems to be going just fine, but it never ask for the 2nd install CD. It goes through disk optimization and everything while still on the 1st CD. Then it reboots itself, but fails to find the OS on the HD and ends up wanting to install again.
I've done this 4 or 5 times now and can't figure out what is happening. Anyone have any ideas?
Thanks.Hmm... After it's done with the first CD, and it's rebooting, the CD is still in there, right? I believe that the mac continues to boot off the first CD until the second is needed. The HD isn't booted from until the installation has finished. Once it's done with the first CD, and restarts, try holding down the "C" key to ensure it doesn't try and boot from the HD.
Depends on what you call normal.
Mathematica 8 (http://www.wolfram.com/mathematica/new-in-8/)
Word processing, iTunes, iLife apps, and even pro apps such as Aperture and Final Cut. Final Cut Pro X will make more use though.
Mathematica 8 (http://www.wolfram.com/mathematica/new-in-8/)
Word processing, iTunes, iLife apps, and even pro apps such as Aperture and Final Cut. Final Cut Pro X will make more use though.
I'd like to know how to change to integrated graphics too on my Macbook pro 2011 so that i can save battery life while using windows bootcamp.
Just a suggestion...Since you also have a MBP (according to your sig) You might want to try posting this on the macbook pro section since more people hang around there than here. :p
Just a suggestion...Since you also have a MBP (according to your sig) You might want to try posting this on the macbook pro section since more people hang around there than here. :p
well... i hate this pc. All it does is fight with me. I am switching back to my eMac once this computer class is over. This hp is going into a closet.
The last 4 or 5 new shows on Comedy Central are all completely pathetic. They are poorly written, and just plain not funny. This includes Too Late with Adam Carolla, that D. L. Hughley show (whatever the **** it's called), Mind Of Mencia (except maybe one or two skits), that Andy Milonakis ********... you get the idea.
Anyone feel the same way I do?
Anyone feel the same way I do?
You could always try adding a few frames to get it to run smoother.
yeah - it's hesitating every 4th frame for me which is really distracting...
yeah - it's hesitating every 4th frame for me which is really distracting...
I would go with a 3DS. I am using a DS Lite still but the new Pokemon is great. I haven't played since red/blue/green/yellow days. Lots of cool upgrades while still feeling very at home. :)
HTC 16 Megapixel handset incoming? (http://www.t3.com/news/htc-16-megapixel-windows-phone-7-handset-incoming?=55525)
Hopefully they wont ruin it by putting cheap, knock-off lenses in.
Megapixel myth.
Even a point'n'shoot camera will yield better results than a cell phone gimmick. Unless all I wanted to do was take illicit snapshots of the price of canned corn in a grocery store's tinned vegetables aisle... grocery stores say they don't like people taking pictures of things in their stores...
Hopefully they wont ruin it by putting cheap, knock-off lenses in.
Megapixel myth.
Even a point'n'shoot camera will yield better results than a cell phone gimmick. Unless all I wanted to do was take illicit snapshots of the price of canned corn in a grocery store's tinned vegetables aisle... grocery stores say they don't like people taking pictures of things in their stores...
You can get a gophone smartphone account now with an iphone, but you need to bring your own phone. I posted my experience with it in the iphone main forum.
Prepaid either $2/day or $0.10/minute and he small data package is cheap but escapes me at the moment. Im on the big one for $25/500mb.
Prepaid either $2/day or $0.10/minute and he small data package is cheap but escapes me at the moment. Im on the big one for $25/500mb.
Get the Crucial 1333MHz, as you need that speed definitely for your iMac, and I assume your laptop uses it as well. If your laptop uses the slower speed, it will not work in your iMac
According to a google result when I typed in the Ram Model part that CPU-Z told me, the Ram in my Dell is 1066. So for a fact this won't work in my iMac at all, even those it is the same 204-pin ddr3 ram?
According to a google result when I typed in the Ram Model part that CPU-Z told me, the Ram in my Dell is 1066. So for a fact this won't work in my iMac at all, even those it is the same 204-pin ddr3 ram?
Requires the updated version of the me.com Calendar. I keep meaning to upgrade since I finally meet all the prereqs, but so many people had issues when they first rolled this out that I just haven't budgeted the time (to fix what it might screw up in my calendards) to get this done.
roadbloc, I see what you mean, but it would be nice to be able to add an event on a friend's computer and still be able to get the alert on my iPhone. Right now I can create an event on me.com but the actual alert has to be set up from my iPhone (or from Calendar on my Mac).
roadbloc, I see what you mean, but it would be nice to be able to add an event on a friend's computer and still be able to get the alert on my iPhone. Right now I can create an event on me.com but the actual alert has to be set up from my iPhone (or from Calendar on my Mac).
I don't know how accurate this is, I'm not saying that its upscaling the DVDs but I am getting 1080p thru component. My TV will show me the resolution at the press of a button and when it changes. The Xbox is 1080p and when I place a DVD in the drive and play it, it does not (any longer) change down to 480p.
Could be changed. There was a Dashboard update that changed what resolutions were available with VGA cables, so they may have changed it. That said, the issue at hand is the DVD Consortium's rules on upscaling. They typically don't allow it over component... most upscaling players HAVE to use HDMI. It's a stupid rule, seeing as you can rip DVDs with complete impunity and then software scale them to any resolution you want (and they MUST know that), and it doesn't effect anything, but that's the general rule.
MS may have a special deal with them though, so who knows.
Could be changed. There was a Dashboard update that changed what resolutions were available with VGA cables, so they may have changed it. That said, the issue at hand is the DVD Consortium's rules on upscaling. They typically don't allow it over component... most upscaling players HAVE to use HDMI. It's a stupid rule, seeing as you can rip DVDs with complete impunity and then software scale them to any resolution you want (and they MUST know that), and it doesn't effect anything, but that's the general rule.
MS may have a special deal with them though, so who knows.
Australia and the US are still up. :(
Meh, they're usually the last to go.
Meh, they're usually the last to go.
i will trade you my 16 gb ipod touch for it. :)Is it unlocked?
Please let me know. I also have the wall charger for it. I would love to get a :apple: iphone
This thread is four months old... Come on.
Please let me know. I also have the wall charger for it. I would love to get a :apple: iphone
This thread is four months old... Come on.
heh.. i figured it out. i accessed it from the optical drive's slot. pbfixit says to go in through the little gap you create between the top and bottom half of the base. i ended up putting some nice dents in my pb from trying to wedge stuff in there.. lo' and behold going in through the optical drive and up released it in 10 seconds. i'm going to email them and let them know they suck. that said, i wouldn't recommend pbfixit.com to anyone.
Thanks for the tip. apple's laptop are always such a pain to open up. Changing the hard drive on my toshiba only involved taking out 5 screws.:(
Thanks for the tip. apple's laptop are always such a pain to open up. Changing the hard drive on my toshiba only involved taking out 5 screws.:(
It seems weird that the trial version contains advertisements. I would think the trial would be the same as the full version. Anyway, did you get it to work with FaceTime on 4.3.2? I haven't been able to get it to work since updating, and was wondering if I was alone with this problem.
I actually never actually used it while I had it installed, was a just in case thing as my gf recently bought an iPad 2 plus I'm still on 4.3.1 as I have LockInfo setup just how I want it and can't be bothered with the upgrade right now.
I actually never actually used it while I had it installed, was a just in case thing as my gf recently bought an iPad 2 plus I'm still on 4.3.1 as I have LockInfo setup just how I want it and can't be bothered with the upgrade right now.
Recently I've been having major problems with my Airport (PowerBook G4) -- a lot of stalls and stops when opening even the most basic webpages, can't download new software (although I did manage to download the latest airport update) -- it's almost as if I'm on dial-up. It's always run a bit slow, but lately it's just been unacceptable. I'm pretty sure it has nothing to do with my provider. Does anyone here have any idea why this is happening?
Dunno what OS you have, but I will assume up-to-date on everything. Click airport signal thingy on top right, and click "use interference robustness" or whatever it's called. Then try.
Or....run the airport setup assistant and make sure it doesn't prompt you for any airport firmware upgrades. If so, do them.
And, hmm, any new 2.4ghz phones in the house? Could cause interference.
Also, make sure you're getting a good direct connection from modem to computer. If that's slow, airport will be even slower. Yum.
Good luck!
Dunno what OS you have, but I will assume up-to-date on everything. Click airport signal thingy on top right, and click "use interference robustness" or whatever it's called. Then try.
Or....run the airport setup assistant and make sure it doesn't prompt you for any airport firmware upgrades. If so, do them.
And, hmm, any new 2.4ghz phones in the house? Could cause interference.
Also, make sure you're getting a good direct connection from modem to computer. If that's slow, airport will be even slower. Yum.
Good luck!
can Aperture 3 directly create albums and/or add photos?
