Done! Voted "yes"
wallpaper Honda FR-V
I am trying to understand the cause for this huge delay to issue either EAD or AP. Could it be due to a large number of I-485 filers in July 2007 that the agency is unable to handle the volume of requests (either for a new one or renewal)?
Has USCIS come up with any explanation as to why there is lot of delay to issue EAD renewals or new EADs? Could it be the US economy that is causing the drag on the agency?
Has USCIS come up with any explanation as to why there is lot of delay to issue EAD renewals or new EADs? Could it be the US economy that is causing the drag on the agency?
This thread seems to express my thoughts.
I used to wait till my dates got current. With my dates being current since November, I still wait with no sign of improvement.
I tried calling the 1-800 number. But, did not get any useful information.
Took an Infopass appointment couple of weeks back. But, it was of no use.
The officer at the local office read the same status that I see online.
She said that my case was transfered to Texas center. (I knew this since October 2007). Only additional information she gave me was that my namecheck got clreared. (Though this is important, I dont think this really matters to get my case processed).
I told her that I have been waiting since years and some of friends who filed later than me already got their GCs, she felt sorry for me but she said there is nothing she can do for me. Not even a Service Request since my dates are within the processing times.
Its getting difficult for me......Also, in this economy its getting tough everyday to hold on to the job. Who knows may be this year quota might be over too. It will definitely be a big relief if we get the GC.
I thought there is nothing I can do now till my dates goes outside the processing times. Please advice.
Good Luck to everyone.
I used to wait till my dates got current. With my dates being current since November, I still wait with no sign of improvement.
I tried calling the 1-800 number. But, did not get any useful information.
Took an Infopass appointment couple of weeks back. But, it was of no use.
The officer at the local office read the same status that I see online.
She said that my case was transfered to Texas center. (I knew this since October 2007). Only additional information she gave me was that my namecheck got clreared. (Though this is important, I dont think this really matters to get my case processed).
I told her that I have been waiting since years and some of friends who filed later than me already got their GCs, she felt sorry for me but she said there is nothing she can do for me. Not even a Service Request since my dates are within the processing times.
Its getting difficult for me......Also, in this economy its getting tough everyday to hold on to the job. Who knows may be this year quota might be over too. It will definitely be a big relief if we get the GC.
I thought there is nothing I can do now till my dates goes outside the processing times. Please advice.
Good Luck to everyone.
2011 Honda FR-V Larger pictures
(d) Form I-140 Petition Must be Approved Prior to a Favorable Determination of a �106(c) AC21 portability request.
this could be read 2 ways...either you need have an approved I-140 prior to filing for portability OR the adjudicator needs to approve the I-140 prior to determining portability.
You can read it 10 ways, but the CIS has only one interpretation(see bold below).
An un-adjudicated Form I-140 petition is not made valid merely through the act of filing the petition with USCIS or through the passage of 180 days. Rather, the petition must have been filed on behalf of an alien who was entitled to the employment-based classification at the time that the petition was filed, and therefore must be approved prior to a favorable determination of a �106(c) AC21 portability request.
this could be read 2 ways...either you need have an approved I-140 prior to filing for portability OR the adjudicator needs to approve the I-140 prior to determining portability.
You can read it 10 ways, but the CIS has only one interpretation(see bold below).
An un-adjudicated Form I-140 petition is not made valid merely through the act of filing the petition with USCIS or through the passage of 180 days. Rather, the petition must have been filed on behalf of an alien who was entitled to the employment-based classification at the time that the petition was filed, and therefore must be approved prior to a favorable determination of a �106(c) AC21 portability request.
Mine was filed on July 17th at NSC with RD Sep 10th. It got transferred to TSC, I received EAD,AP for me and my wife but havent recd FP. Opened service request 3 weeks back of no avail....:confused:
I thought the same but they need to get out of the queue before you and I can get our turn :) .. Good for them finally ...
In the longer run I guess it makes predicitions easy :).
One thing , did any other reputed site report this news ?
In the longer run I guess it makes predicitions easy :).
One thing , did any other reputed site report this news ?
Congratulations and you are a VERY generous man!! Hope this will motivate several of us to contribute to the cause.
2010 Honda FR-v 6 Seater
Fax sent
Service industry is not always based on labor cost differentials. Many services are value added services. For example, stock brokers used to charge $200 and above for stock trades; however, electronic brokers came and made the industry efficient and hence can profit more by charging only $10 or even less. But this does not mean that the stock brokers are earning less. In fact they are earning more than before. However, their value additions come from faster settlement times and high volumes. This is easier to analyze. Now look at London or Hong Kong -- what services it provides and why is it booming?
High investments in R&D in general is good for economy but not necessarily true for a company. For example, German manufacturers are best R&D shops; however, their over investment in precision is precisely their problem. On the other hand Apple copied mp3 music players from Creative and made millions. One can find countless examples of skilled marketing (services) not innovative products making money. So don't assume that R&D investments are always good for a company.
Finally, Wipro & the likes -- they have already opened up shops in China, Mexico, Brazil (yes)... and finally if dollar falls further they could actually buy the US companies and make them efficient (Honda and GM example).
As long as quick money can be invested into wise investments, it can be safe. But do remember, to build anything from scratch is a pain, but to manage and service it is easy. All the easy money, if invested in long term growth will be very benefitial to humanity
High investments in R&D in general is good for economy but not necessarily true for a company. For example, German manufacturers are best R&D shops; however, their over investment in precision is precisely their problem. On the other hand Apple copied mp3 music players from Creative and made millions. One can find countless examples of skilled marketing (services) not innovative products making money. So don't assume that R&D investments are always good for a company.
Finally, Wipro & the likes -- they have already opened up shops in China, Mexico, Brazil (yes)... and finally if dollar falls further they could actually buy the US companies and make them efficient (Honda and GM example).
As long as quick money can be invested into wise investments, it can be safe. But do remember, to build anything from scratch is a pain, but to manage and service it is easy. All the easy money, if invested in long term growth will be very benefitial to humanity
hair honda-honda-fr-v.jpg
The problem really was that IOs are not properly briefed on AC21. There are some cases where they have to ask their supervisors about it. What if the supervisors are also not familiar with AC21?
As others are saying, IOs will soon gain more knowledge on AC21 as many will use it due to the retrogression. Until that time, it is risky.
As others are saying, IOs will soon gain more knowledge on AC21 as many will use it due to the retrogression. Until that time, it is risky.
I have notice one more soft LUD on new I 129. I don't know whats going on.
Any one with same or similar experience?
Hi shana,
Don't think tooo much about this. Nobody knows exactly how and when LUD is updated.
Any one with same or similar experience?
Hi shana,
Don't think tooo much about this. Nobody knows exactly how and when LUD is updated.
hot Honda FR-V Becomes the Most
Definite. My journey was worth it, even considering all the diffiulties. In India, I had a flourshing practice and when I was planning to go to US, my friends will call be a "fool".
However, looking back, I think I made a wise decision. I have a very good academic job, for which I am proud of. My wife has a very respectable job, which she could not have done there. My kids are much more independent and mature and have more opportunities in terms of education, jobs, travel etc. My health is far better here (I was allergic to dust and had athma). I have more time to enjoy sports and travel. Most of my immediate family is in US.
In nutshell, YES, I did the right thing.
Excellent!! Congrats and glad that it all worked out for you.
However, looking back, I think I made a wise decision. I have a very good academic job, for which I am proud of. My wife has a very respectable job, which she could not have done there. My kids are much more independent and mature and have more opportunities in terms of education, jobs, travel etc. My health is far better here (I was allergic to dust and had athma). I have more time to enjoy sports and travel. Most of my immediate family is in US.
In nutshell, YES, I did the right thing.
Excellent!! Congrats and glad that it all worked out for you.
house Honda FR-V VTEC SE for Sale
Can somebody tell in simpe words.
Is the country quota is still soft quota or it is now rigid 7% irrespective of the fact that visa numbers of other countries are unused.
Is the country quota is still soft quota or it is now rigid 7% irrespective of the fact that visa numbers of other countries are unused.
tattoo The car is a Honda FRV - in
Unless there is a change in immigration laws it will be very true that you cannot apply for 485 in the next 5 years. To make something happen it is very important to attend DC Rally.
So folks who are reading this, notice the importance of the Rally and your presence at the rally.
I am really surprised. Why would it EB3 go back to 2001.
I have just applied for my labour. So I can apply for 485 only after 5/6 years?:mad:
So folks who are reading this, notice the importance of the Rally and your presence at the rally.
I am really surprised. Why would it EB3 go back to 2001.
I have just applied for my labour. So I can apply for 485 only after 5/6 years?:mad:
pictures Honda FR-V
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
dresses 2008 - 58 Reg Honda FR-V SE
Filed on July 27, we have not yet received FP Notice.
Talked to service center (3rd party customer service) on Nov 16, they have assigned a ticket, they mentioned USCIS will respond with in 45 days.
Talked to service center (3rd party customer service) on Nov 16, they have assigned a ticket, they mentioned USCIS will respond with in 45 days.
makeup Honda. Model: FR-V. Version:
NBC pointed out inter-agency communication issue and reflected the frusturation very well. :D
girlfriend 2006 - 56 Reg Honda FR-V
^^^^^^^^^^^^^
hairstyles 2008 Honda FR-V, Engine View,
Could you please tell me how is it with the pictures for I-485 ?
Is the photo digital or paper? OR the photo is first digital then you're printing it? Am I correct?
So from my understanding.....you go to Kinkos or CVS( do they know the requeirments of photo if I tell them about immigration photo for Adjustment of status?) .....they make a digital photo of you and then they are printing the digital photo? is this correct?
Please tell me what to do and where to go for I-485 photos.
Thank you in advance so much for your help.
Is the photo digital or paper? OR the photo is first digital then you're printing it? Am I correct?
So from my understanding.....you go to Kinkos or CVS( do they know the requeirments of photo if I tell them about immigration photo for Adjustment of status?) .....they make a digital photo of you and then they are printing the digital photo? is this correct?
Please tell me what to do and where to go for I-485 photos.
Thank you in advance so much for your help.
Done
Yes. Everyone please contact your state chapters. IV is running a massive effort and we need all the help we can.
Members from NY/NJ/CT, please join the yahoo group. Murli and others are leading a strong campain. We need more support.
Always check with your state chapters.
State chapter leaders are more aware of our work than what we post on the forum for public.
There is lot of activity going on at this time. Everyone must join their state chapters to actively participate in IV effort.
There maybe some more news today. Hopefully... Stay tuned.
Members from NY/NJ/CT, please join the yahoo group. Murli and others are leading a strong campain. We need more support.
Always check with your state chapters.
State chapter leaders are more aware of our work than what we post on the forum for public.
There is lot of activity going on at this time. Everyone must join their state chapters to actively participate in IV effort.
There maybe some more news today. Hopefully... Stay tuned.
