Hmm... After it's done with the first CD, and it's rebooting, the CD is still in there, right? I believe that the mac continues to boot off the first CD until the second is needed. The HD isn't booted from until the installation has finished. Once it's done with the first CD, and restarts, try holding down the "C" key to ensure it doesn't try and boot from the HD.
Actually, after the first CD is done installing, the installer boots from the internal HD (or at least, it should). The installer then continues pulling from the CD to finish the installation (if there is more needed, you actually don't need the 2nd CD for a fully functional system).
You can try doing a custom install with only the minimal install features and see if you can at least get a bootable system. Then you can do additional installs from the 2nd CD directly from the Finder, you just have to navigate to the packages that you want to install.
Actually, after the first CD is done installing, the installer boots from the internal HD (or at least, it should). The installer then continues pulling from the CD to finish the installation (if there is more needed, you actually don't need the 2nd CD for a fully functional system).
You can try doing a custom install with only the minimal install features and see if you can at least get a bootable system. Then you can do additional installs from the 2nd CD directly from the Finder, you just have to navigate to the packages that you want to install.
I do have a lens coat on my 400mm, and the greatest benefit for me is that it keeps my hands warmer in our cold Canadian winter since I'm not holding onto bare metal.
Down here, we have these things called gloves... :D
On a serious note, I find that the pre-shaped neoprene Kayaker's gloves work well, as well as everything else you might need to touch in the winter- I can operate my camera gear without removing them and shove them into a pair of mittens while I'm waiting around.
Paul
Down here, we have these things called gloves... :D
On a serious note, I find that the pre-shaped neoprene Kayaker's gloves work well, as well as everything else you might need to touch in the winter- I can operate my camera gear without removing them and shove them into a pair of mittens while I'm waiting around.
Paul
If I am going to hook up my Xbox 360 with HD DVD drive up to a 1080p TV, which will look better: VGA or HDMI? The reason I am asking this is because I want to know whether to go for the Premium or the Elite, seeing as I don't like the black color of the Elite and don't think that I'll fill up the 20GB hard drive in the premium. Does VGA look just as good as HDMI? Because then I think I'm just going to go for the premium. Or are the rumors true, and will the Elite, once it sells a certain number, have its price cut and become white again?
Well, from what's been said, the Elite will eventually be integrated into the normal xbox 360 lineup. What's unsure is whether it will take on the premium's price or stay a bit higher.
That being said, if you have a 1080p tv, and you have the money I would probably get an hdmi equipped 360. On the other hand, if you arn't an absolute stickler about it, the 360 looks great in HD with VGA - to most people there would likely be little to no difference. I'm going to go out on a limb here and say that adding hdmi to the box is more or less a marketing ploy rather than a necessity.
I have hooked my 360 up with the included component cables at 1080 and it is good enough for me.
the single biggest thing I would keep in mind when buying a 360 isn't HDMI or VGA or even harddrive size. You know what it would be?
Get one manufactured RECENTLY that has the quiet(er) drive in it. If I could get rid of even HALF the noise that comes from the DVD drive I'd be a happy camper.
Well, from what's been said, the Elite will eventually be integrated into the normal xbox 360 lineup. What's unsure is whether it will take on the premium's price or stay a bit higher.
That being said, if you have a 1080p tv, and you have the money I would probably get an hdmi equipped 360. On the other hand, if you arn't an absolute stickler about it, the 360 looks great in HD with VGA - to most people there would likely be little to no difference. I'm going to go out on a limb here and say that adding hdmi to the box is more or less a marketing ploy rather than a necessity.
I have hooked my 360 up with the included component cables at 1080 and it is good enough for me.
the single biggest thing I would keep in mind when buying a 360 isn't HDMI or VGA or even harddrive size. You know what it would be?
Get one manufactured RECENTLY that has the quiet(er) drive in it. If I could get rid of even HALF the noise that comes from the DVD drive I'd be a happy camper.
It's worth about $15. In ten years maybe $10.
In thirty years, if it still works and you can find some packaging for it (Original is best) - You might get $300 or so for it (Thats what decent nick 20year old rare models go for now, so since yours isnt particularly rare, thats what Id expect its max price to be if it was fully functional at 40something
In thirty years, if it still works and you can find some packaging for it (Original is best) - You might get $300 or so for it (Thats what decent nick 20year old rare models go for now, so since yours isnt particularly rare, thats what Id expect its max price to be if it was fully functional at 40something
most TVs don't include an audio in port for the HDMI.
you can use something like
this (http://www.monoprice.com/products/product.asp?c_id=101&cp_id=10114&cs_id=1011405&p_id=5369&seq=1&format=2) - a dvi and digital audio combiner, that outputs HDMI.
and one of these (http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10229&cs_id=1022902) toslink to mini cable to connect audio from your computer to the box.
and one of these (http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10209&cs_id=1020901&p_id=2685&seq=1&format=2) dvi cables to connect your computer to the box.
you'll also need an HDMI male to male, to plug the box into your TV.
also look at your TV manual, or if you're using an external stereo that has digital inputs. the toslink to mini cable might come in handy.
FWIW, I use that specific box (http://www.monoprice.com/products/product.asp?c_id=101&cp_id=10114&cs_id=1011405&p_id=5369&seq=1&format=2) referenced by waw74. Works just fine on my Mac Pro.
you can use something like
this (http://www.monoprice.com/products/product.asp?c_id=101&cp_id=10114&cs_id=1011405&p_id=5369&seq=1&format=2) - a dvi and digital audio combiner, that outputs HDMI.
and one of these (http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10229&cs_id=1022902) toslink to mini cable to connect audio from your computer to the box.
and one of these (http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10209&cs_id=1020901&p_id=2685&seq=1&format=2) dvi cables to connect your computer to the box.
you'll also need an HDMI male to male, to plug the box into your TV.
also look at your TV manual, or if you're using an external stereo that has digital inputs. the toslink to mini cable might come in handy.
FWIW, I use that specific box (http://www.monoprice.com/products/product.asp?c_id=101&cp_id=10114&cs_id=1011405&p_id=5369&seq=1&format=2) referenced by waw74. Works just fine on my Mac Pro.
Thank you very much for the very thorough responses.
As I said I am not the most tech savvy guy in the world and sometimes it's frustrating (as a creative professional) to try and learn the tech side of things on top of having to master FCP,AE,PS,C4D,AI, etc etc.
The flip side of course, is tech geniuses have to put up with my amateurish questions. Heh.
As I said I am not the most tech savvy guy in the world and sometimes it's frustrating (as a creative professional) to try and learn the tech side of things on top of having to master FCP,AE,PS,C4D,AI, etc etc.
The flip side of course, is tech geniuses have to put up with my amateurish questions. Heh.
Requires the updated version of the me.com Calendar. I keep meaning to upgrade since I finally meet all the prereqs, but so many people had issues when they first rolled this out that I just haven't budgeted the time (to fix what it might screw up in my calendards) to get this done.
roadbloc, I see what you mean, but it would be nice to be able to add an event on a friend's computer and still be able to get the alert on my iPhone. Right now I can create an event on me.com but the actual alert has to be set up from my iPhone (or from Calendar on my Mac).
roadbloc, I see what you mean, but it would be nice to be able to add an event on a friend's computer and still be able to get the alert on my iPhone. Right now I can create an event on me.com but the actual alert has to be set up from my iPhone (or from Calendar on my Mac).
Oh I'm sorry, wrong meeting.
Wrong meeting? errr… how many do you actually go to??? :eek: ;)
As for Time Team - did they find an actual full henge? (Well all the post holes)? I can't remember either... (I thought it was the local work camp and an explanation of the ritual landscape?)
I thought they found evidence of the post holes in a circle, and outside of that circle they found human remains, I do remember the ceremonial walkway between the sites, and the theory that they'd built a dock on the nearby river etc.
But like I said it's all rather fuzzy though. *strokes chin*
Wrong meeting? errr… how many do you actually go to??? :eek: ;)
As for Time Team - did they find an actual full henge? (Well all the post holes)? I can't remember either... (I thought it was the local work camp and an explanation of the ritual landscape?)
I thought they found evidence of the post holes in a circle, and outside of that circle they found human remains, I do remember the ceremonial walkway between the sites, and the theory that they'd built a dock on the nearby river etc.
But like I said it's all rather fuzzy though. *strokes chin*
Thank you for your replies. Could someone point me in the right direction on how to jailbreak 4.2.1?
Thanks
Thanks
My new display has a Mini DisplayPort, but my computer has a DVI connection. I didn't read the tech specs closely and now I have a display that can't connect to my computer. I've read about the Atlona dual link converter, but I've heard that will only work if my graphics card (ATI Radeon HD 2600) supports the resolutions that are available with the display. (I made a mistake in the subject line - my mac pro is early-2008.)
What resolutions does the 27" have, such that I may check that against my current graphic card?
I'm also thinking about just buying a new graphics card. What graphics card will both work with my computer and with the 27" display?
(The page for the ATI Radeon HD 5770 (http://store.apple.com/us/product/MC742ZM/A?mco=MTY3ODQ5OTY) at the Apple Store says mid-2010, but my Mac is early-2008. Additionally, my System Profiler says I have PCIe, whereas the previously-mentioned card need PCI Express 2.0. Are these incompatible?)
I'm a but stupid about these things, so thanks for any help.
The ATI Radeon HD 5770 doesn't work with the ACD27". I know it has DisplayPort, but there is a bug with various ATi 5xxx cards which makes them incompatible. It is an ATi issue and there is NO fix.
That being said, all ATI 5xxx EYEFINITY 6 cards with DisplayPort work. All AMD Radeon 6xxx cards with DisplayPort work. And all nVidia GeForce cards with DisplayPort work. You can get a nice GeForce card w/ DP for $150. And any modern video card will support 2560x1440. Any DisplayPort video card on newegg will work for you as long as it isn't an ATi Radeon 5xxx card. You could also buy an Atlona DP400 but its $150, the same as a new video card (ripoff).
What resolutions does the 27" have, such that I may check that against my current graphic card?
I'm also thinking about just buying a new graphics card. What graphics card will both work with my computer and with the 27" display?
(The page for the ATI Radeon HD 5770 (http://store.apple.com/us/product/MC742ZM/A?mco=MTY3ODQ5OTY) at the Apple Store says mid-2010, but my Mac is early-2008. Additionally, my System Profiler says I have PCIe, whereas the previously-mentioned card need PCI Express 2.0. Are these incompatible?)
I'm a but stupid about these things, so thanks for any help.
The ATI Radeon HD 5770 doesn't work with the ACD27". I know it has DisplayPort, but there is a bug with various ATi 5xxx cards which makes them incompatible. It is an ATi issue and there is NO fix.
That being said, all ATI 5xxx EYEFINITY 6 cards with DisplayPort work. All AMD Radeon 6xxx cards with DisplayPort work. And all nVidia GeForce cards with DisplayPort work. You can get a nice GeForce card w/ DP for $150. And any modern video card will support 2560x1440. Any DisplayPort video card on newegg will work for you as long as it isn't an ATi Radeon 5xxx card. You could also buy an Atlona DP400 but its $150, the same as a new video card (ripoff).
Nice *Installing*:cool:
Just tried a small file. No go. It won't let me get that far. I go to the picture, copy..."clunk". I go to the forum, type in and click paste. Nothing. Why the "clunk" when it wasn't there before?
BTW...I have no trouble with youtube videos or "attachments".
That's not how you do it. Follow these directions:
Betsey Johnson blends the
Betsey Johnson Chantilly Lace
black Betsey Johnson swimwear
Betsey Johnson Floral Print
Betsey Johnson Swimwear 2011
at Betsey Johnson,
Betsey Johnson Swimwear Reform
BTW...I have no trouble with youtube videos or "attachments".
That's not how you do it. Follow these directions:
The border around the content area (just outside the drop shadow) isn't the same as the background...is that intentional?
It could be to do with web-safe colours- when you designed the images did you use photoshop with the pallette set to 'web'? Just an idea. Also, Macs use a default gamma value 1.8 whereas windows uses 2.2, and again perhaps it's something to do with that. I'm stabbing in the dark here really, because I'm not sure. I've had some weird problems with my own sites that are only apparent under Safari...
It could be to do with web-safe colours- when you designed the images did you use photoshop with the pallette set to 'web'? Just an idea. Also, Macs use a default gamma value 1.8 whereas windows uses 2.2, and again perhaps it's something to do with that. I'm stabbing in the dark here really, because I'm not sure. I've had some weird problems with my own sites that are only apparent under Safari...
I recommend reading this: http://www.cyclismo.org/tutorial/R/ and if you want a really good guide this: http://stats.lse.ac.uk/penzer/ST419materials/
:-) Teabgs will be happy!!! Right Teabgs!!! The famous, kickass money Swithc Ad creater ;-) And now he can make better ones ;-)
Considering you're running the WORST version security wise of phpBB I'd suggest you update, it's not hard no matter how many MODs you have, and if you're that worried about it I could even do it for you...
We actually fixed the security hole in the version that is listed for that site. But now we are looking to converting to punbb.
We actually fixed the security hole in the version that is listed for that site. But now we are looking to converting to punbb.
if you're past the first 14 days, they won't do anything about one pixel.
Hello World, my first post on macrumors
I tried searching but most of the information was not in recent time, so figured to post a new thread.
I bought a used 3GS 8GB yesterday from a person. The phone is unlocked and jailbroken.
Here is the relevant information:
Version: 4.3.2 (8H7)
Model: MC640LL
Modem Firmware (baseband, i think): 06.15.00
Currently I am using it with T-Mobile, so I know it is unlocked properly.
My question is....
The phone has apps and settings from the previous user. I want to 'reset' or 'restore' or something like that to remove all settings and content from previous user.
If I go to Settings --> General --> Reset and perform a reset, will my phone still be usable with T-Mobile?
Thank you all. Hope I provided enough info to answer.
I tried searching but most of the information was not in recent time, so figured to post a new thread.
I bought a used 3GS 8GB yesterday from a person. The phone is unlocked and jailbroken.
Here is the relevant information:
Version: 4.3.2 (8H7)
Model: MC640LL
Modem Firmware (baseband, i think): 06.15.00
Currently I am using it with T-Mobile, so I know it is unlocked properly.
My question is....
The phone has apps and settings from the previous user. I want to 'reset' or 'restore' or something like that to remove all settings and content from previous user.
If I go to Settings --> General --> Reset and perform a reset, will my phone still be usable with T-Mobile?
Thank you all. Hope I provided enough info to answer.
I am afraid that it is not bug free yet, and with all the in-house designed features that it is offering, they simple aren't great enough to offset the way the members act.
Keep it and upgrade the RAM yourself. It's much cheaper.
china doesn't need the iPhone, they can use their cheap little knockoff iphones... :p
And why would you need wifi in a country without internet?
And why would you need wifi in a country without internet?
The best part about this thread is the title: I read it as "China Unicorn finalizing deal for iPhone 4..."
Charlie the Unicorn finalizing deal for iPhone 4 (http://www.youtube.com/watch?v=Q5im0Ssyyus)
Charlie the Unicorn finalizing deal for iPhone 4 (http://www.youtube.com/watch?v=Q5im0Ssyyus)
I've been into these keynotes and rumors since the September 2006 iPod announcements. This MacWorld has me more hyped that Christmas this year.
I remember reading an article online about Ultra Low Sulfur Diesel. This is a new low-sulfur diesel (pretty much equivilent to European low-sulfur diesel) that is going to replace the current-grade US Diesel (which has 50 times more sulfur). Here's a link. (http://www.dieselforum.org/factsheet/ulsd.html)
It's supposed to be phased in starting next year, so maybe we'll see more diesels offered for sale in the near future. I think SUV's especially should start using these more fuel-efficient engines.
It's supposed to be phased in starting next year, so maybe we'll see more diesels offered for sale in the near future. I think SUV's especially should start using these more fuel-efficient engines.
